ATEX is named after the French “ATmosphère EXplosible”
Since July 1st 2003 it has been mandatory under European law, that all equipment for use in a potentially explosive atmosphere must conform to specific safety standards. Many manufacturing processes, including biodiesel production, generate potentially explosive atmospheres.
European Directive 137 – The protection of workers from potentially explosive atmospheres – makes it mandatory under European law to assess for an explosion risk and classify the area accordingly.
For more information please see:
www.europa.eu.int/comm/enterprise/atex
UK – Dangerous Substances and Explosive Atmospheres Regulations 2002
The following information is intended as a guide only. Determination of appropriateness of equipment is the responsibility of the organisation / user.
A professional risk assessment determines hazardous area zones EN 60079-10 is the european standard for determining the classification of hazardous areas, giving guidance on determining the area classification and recommendations for detailing the zones on drawings.
• Zone 0 – An area where an explosive atmosphere is present continuously or for long periods
• Zone 1 – An area where an explosive atmosphere is likely to to occur in normal operation
• Zone 2 – An area where an explosive atmosphere is not likely to occur in normal operation
|
Zone
|
Description
|
Equipment Category
|
|
|
(gases & vapours)
|
(dusts) |
||
|
Zone 0
|
Zone 20
|
An area where an explosive atmosphere is present continuously or for long periods
|
Category 1
|
|
Zone 1
|
Zone 21
|
An area where an explosive atmosphere is likely to to occur in normal operation
|
Category 2
|
|
Zone 2
|
Zone 22
|
An area where an explosive atmosphere is not likely to occur in normal operation
|
Category 3
|
| Classification of gases and dusts | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Gases and dusts are classified according to their ignition properties | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| For gases and vapours, the gas group (explosion group) is determined according to: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| The dangerousness of the gases increases from gas group IIA to IIC. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Temperature class is based on the autoignition temperature of the material | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
MESG – Experimental vessel has an aperture of length 25mm from the inside to the outside of the vessel. Width (gap) is adjustable. MESG is the maximum gap that an internal ignition of an explosive mixture is not propagated to the exterior. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Temperature class relates to all parts of equipment that can come into contact with potentially explosive atmosphere
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Method of explosion protection | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
